Fast, Reliable Heat Pump & Mini Split Across Clovis
Heat pump and mini split service in Clovis typically runs $150–$650 for repairs and $3,500–$7,500 for full system installations, with most calls completed same-day. We’re Stonegate Heating & Air California, and our Heat Pump & Mini Split crew covers all four Clovis ZIP codes — 93611, 93612, 93613, and 93619 — from our Sacramento base, with scheduling that prioritizes the San Joaquin Valley’s brutal summer season when systems fail hardest. If your heat pump quit on a 110°F afternoon or your mini split’s blowing warm air through Tule fog season, call us at (855) 467-1888. Jason Trent, our owner and active Field Supervisor, has spent 16 years diagnosing exactly how Clovis’s attic-baked equipment and agricultural dust exposure break HVAC systems differently than they do in other Central Valley towns.
Why Stonegate Heating & Air California Is Clovis’s Preferred Heat Pump & Mini Split Company
We’ve earned 499 verified customer reviews at a 4.7-star average across platforms, and that volume matters because it reflects hundreds of real jobs finished, not a curated handful. Clovis homeowners specifically mention our response during peak heat weeks when their 1990s and 2000s-era builder-grade systems finally give out.
Jason Trent doesn’t delegate from an office. He holds the title of Field Supervisor, which means he’s physically on job sites — including yours in Clovis — supervising installs, checking refrigerant charge calculations, and verifying that every heat pump replacement accounts for your home’s actual attic conditions. Where franchise chains send whichever tech is available that day, you’ll see the same owner-accountable presence from quote to final walkthrough.
Our multi-brand fluency eliminates the “we don’t service that brand” dead end. We’re experienced with Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. In Clovis’s 93619 communities especially, that matters because original equipment varies by builder — some streets are heavy with Bryant two-stage units, others with early Daikin splits — and we carry the parts knowledge to fix whatever’s there without delay.
From a single-room mini split in a Clovis garage conversion to a full multi-zone system replacing a failed heat pump in Harlan Ranch, our scope removes the need to vet multiple contractors. Emergency HVAC available.
Our Heat Pump & Mini Split Services in Clovis
Heat Pump Installation
Clovis’s rapid eastward expansion produced waves of late-1990s through mid-2000s tract homes now hitting the 15–25 year hard-replacement window simultaneously. In master-planned 93619 communities like Harlan Ranch — built almost entirely between 2004 and 2009 — original two-stage systems are failing in clusters. Our technicians who run those streets in summer are often replacing three or four same-vintage units on the same cul-de-sac in a single week, because the entire neighborhood was commissioned within an 18-month window. We recently swapped a failed Lennox two-stage heat pump in a 2006-built two-story on Copperleaf Drive, Harlan Ranch, where the attic-mounted air handler had baked in 150°F summers for 18 years, cooking the blower motor and cracking the refrigerant line. With the homeowner already using a high-MERV filter we’d recommended on a prior tune-up, the new Carrier multi-speed unit (paired with 26 SEER outdoor section) now meets their cooling needs without the old unit’s capacity losses from dust-clogged coils.
Mini Split Install
Clovis’s stucco-and-tile-roof tract homes, typically 1,800–3,200 sq ft with air handlers in unconditioned attics, are prime candidates for mini split conversion when the existing ductwork is too compromised to salvage. We install Daikin and Bryant ductless systems that bypass attic heat entirely, placing the indoor unit on an exterior wall where it conditions the space directly. For homeowners in 93619’s windier eastern edge, mini splits also reduce the dust infiltration that overwhelms central systems. Multi-zone configurations let you condition a converted garage or ADU separately from the main house without extending ductwork through that 140°F attic space.
Multi-Zone System
A multi-zone mini split setup solves the classic Clovis problem: a two-story tract home where the upstairs bedrooms roast while the downstairs over-cools because the single thermostat sits in the hallway. We configure Daikin and Carrier multi-zone systems with individual heads per room, each with its own temperature control. In 93611 and 93612’s older subdivisions, where original heat pumps struggle to balance loads across 2,400 sq ft with one air handler, multi-zone retrofits eliminate the thermostat wars and cut energy bills by stopping the conditioning of empty rooms.
Heat Pump Repair
When a Clovis heat pump fails mid-July, speed matters. We stock common compressor contactors, capacitors, and refrigerant line repair kits for the brands we see most in this market — Carrier, Bryant, and early Daikin units especially. Our diagnostics focus on the failure modes Clovis attics create: compressor oil breakdown from sustained 155°F exposure, refrigerant line corrosion from Tule fog condensation trapped in unconditioned spaces, and blower motor failure from agricultural dust infiltration. We don’t guess. We test pressures, amp draws, and superheat calculations specific to your system’s design conditions.
Mini Split Repair
Ductless systems in Clovis fail differently than central heat pumps. The outdoor condenser sits at ground level, not in an attic, but it faces the same dust loading — and the line sets run through exterior walls where stucco penetration seals degrade in thermal expansion cycles. We repair refrigerant leaks at flare connections, replace failed inverter boards in Daikin and Bryant wall mounts, and clear clogged condensate drains that back up during fog season. Same-day parts availability for the nine brands we cover means most mini split repairs finish in one visit.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Clovis
We’re factory-trained or field-experienced on nine major HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. In Clovis specifically, we see heavy concentrations of Carrier and Bryant heat pumps from the 2004–2009 construction boom, plus growing numbers of Daikin mini splits in newer infill and garage conversions. We stock common parts locally for faster turnaround, and our relationships with distributors mean we can source same-day or next-day components for less common failures. Whatever brand you have, one team handles it — no referral to a separate contractor, no “we’ll call you when the part comes in” delays.
Common Heat Pump & Mini Split Problems We See in Clovis Homes
- Compressor oil breakdown from attic heat. Clovis attics hit 140–155°F on peak summer days, breaking down lubricating oil in 1998–2005 builder-grade heat pumps years faster than manufacturer estimates. The compressor seizes or runs at elevated amp draw until it trips the breaker or burns out entirely.
- Refrigerant line corrosion from Tule fog condensation. December through January fog events drive moisture into unconditioned attics where copper lines sweat, corrode, and develop pinhole leaks. Homeowners notice slowly declining cooling capacity for months before the system finally fails on the first hot day.
- Blower motor failure from agricultural dust infiltration. The eastern ZIPs, especially 93619 toward the Sierra foothills, see more wind-driven agricultural dust than flat urban Fresno. That dust loads filters faster, bypasses gaps in return plenums, and packs onto blower wheels until motors overheat and fail.
- Simultaneous-vintage failures in master-planned communities. Entire Harlan Ranch cul-de-sacs were built with identical equipment within 18-month windows. When those systems age out, they fail in clusters — three or four neighbors calling the same week with the same compressor model showing the same failure pattern.
Pricing for Heat Pump & Mini Split in Clovis, CA
A typical heat pump repair in Clovis runs $150–$650 depending on whether it’s a failed capacitor or a full compressor replacement. Heat pump installation, including the outdoor condenser and indoor air handler replacement, typically falls in the $3,500–$7,500 range based on tonnage, SEER rating, and whether we’re reconfiguring ductwork or upsizing filtration. Mini split installs vary with the number of zones — a single-head system runs toward the lower end, while multi-zone configurations with three or more heads climb higher based on line set complexity and electrical upgrades.
| Service | Typical Range in Clovis |
|---|---|
| AC Installation / Heat Pump Replacement | $3,500 – $7,500 |
| AC Repair / Heat Pump Repair | $150 – $650 |
| Furnace Repair (auxiliary heat systems) | $150 – $700 |
| Annual Tune-Up | $80 – $200 |
What moves you within these ranges: attic accessibility (tight truss spaces add labor), electrical panel capacity for higher-SEER units, and whether we’re adding high-MERV filtration — standard in Clovis due to San Joaquin Valley air quality. We provide exact quotes after onsite assessment. Estimates are free. Call (855) 467-1888 to schedule.
We Also Serve Cities Near Clovis
Our Heat Pump & Mini Split service area extends throughout the San Joaquin Valley, including Fresno to the west with its older, more varied housing stock, Old Fig Garden and its mature-tree shading that changes cooling load calculations, Sanger to the southeast, and Fowler to the south. Each city’s equipment age, housing type, and microclimate create distinct repair patterns, and we adjust our diagnostics accordingly.
Serving Clovis, CA — Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Heat Pump & Mini Split in Clovis
They were installed during a concentrated 2004–2009 construction boom, so entire neighborhoods hit the 15–20 year failure window simultaneously. In Harlan Ranch specifically, our crew has replaced three or four same-vintage Lennox or Carrier two-stage units on a single cul-de-sac in one week because every home was commissioned within an 18-month period. If your 93619 heat pump is original, proactive inspection beats midsummer emergency replacement. Call (855) 467-1888 for a tune-up and honest assessment of remaining life.
Yes — mini splits include dedicated filtration at each indoor head, and we can specify high-MERV or media filters that capture PM2.5 and agricultural dust better than aging central ductwork with leaky returns. Clovis sits in one of the nation’s worst air quality basins for particulate matter and ozone, so filtration upsells are standard in our install conversations here. A multi-zone mini split also eliminates the duct leaks that pull attic dust and garage fumes into your air stream. Call (855) 467-1888 to discuss filter specifications for your space.
On an exterior wall of the most-used living space, positioned to throw air across the room without blowing directly on occupants, avoiding walls that face west and absorb peak afternoon heat. In Clovis’s 1,800–3,200 sq ft stucco homes, we typically mount the head 6–8 inches below ceiling height on a north or east-facing wall, running the line set straight through to the outdoor condenser rather than routing through that 150°F attic. This minimizes refrigerant line length, preserves efficiency, and avoids the heat gain and dust exposure that attic routing creates. Call (855) 467-1888 for a site-specific layout.
Tule fog events from December through January create sustained moisture that corrodes refrigerant lines in unconditioned attics and can ice up outdoor coils if the defrost cycle is compromised. The fog also drives heating demand for weeks at a time, stressing heat pumps that rely on auxiliary electric strips when outdoor temperatures drop below their balance point. We inspect defrost controls and auxiliary heat sequencing during fall tune-ups specifically for this pattern. Call (855) 467-1888 before fog season starts.
Yes — the City of Clovis requires permits for heat pump replacements, and we handle the application, inspection scheduling, and code compliance as part of our installation service. Clovis follows California Title 24 energy efficiency standards, which means replacement equipment must meet current SEER and HSPF minimums, and duct sealing requirements apply if we’re modifying existing distribution. Jason Trent or our lead technician meets the inspector on-site to verify proper installation. Call (855) 467-1888 and we’ll manage the permit process start to finish.
Written by Jason Trent, Owner and Field Supervisor at Stonegate Heating & Air California, serving Clovis and the San Joaquin Valley since 2008.