Fast, Reliable Heating & Furnace Across Clovis
Heating and furnace repair in Clovis typically runs $150–$700, with most service calls completed same-day by our Heating & Furnace team. Stonegate Heating & Air California has dispatched to Clovis from our Sacramento base for 16 years, and we know the specific failure patterns that hit this city’s tract-home neighborhoods. Whether you’re in a 1990s-era subdivision off Shaw Avenue or a newer build in Harlan Ranch, we’ll get heat restored fast. Call (855) 467-1888 for a free estimate.
Why Stonegate Heating & Air California Is Clovis’s Preferred Heating & Furnace Company
We’ve earned 499 verified reviews at a 4.7-star average by showing up prepared and staying accountable. Owner Jason Trent serves as active Field Supervisor on jobs, not a back-office figurehead. That means when we roll into Clovis, the same person who built this company over 16 years is checking the work.
Clovis customers specifically mention our speed to the 93611, 93612, 93613, and 93619 ZIP codes. We know the difference between the dense, pre-2000 subdivisions near Clovis Avenue and the master-planned communities off Deauville Avenue. That local fluency saves diagnostic time.
Our multi-brand certification matters here. Clovis homes run Carrier, Trane, Lennox, Bryant, American Standard, and others. We don’t waste your time with “we don’t service that brand.” Whatever system you have, we’ve worked on it.
Our Heating & Furnace Services in Clovis
Furnace Repair
Furnace repair in Clovis starts at $150 and tops out around $700 for complex multi-part failures. The most common call we get from 93611 and 93612 addresses blower motors cooked by 140–155°F attic temperatures. We stock replacement motors, ignitors, and control boards for the major brands, so most Clovis repairs finish in a single visit.
Furnace Replacement
Furnace replacement in Clovis runs $3,500–$7,500 depending on size, efficiency tier, and ductwork condition. This is where Clovis’s unique housing story hits hard. The late-1990s through mid-2000s builder-grade tract homes across 93611 and 93619 are now in a concentrated 15–25 year replacement window. In master-planned 93619 communities like Harlan Ranch, built almost entirely between 2004 and 2009, original two-stage systems were installed within an 18-month window. Technicians who run those streets in winter are often replacing three or four same-vintage units on the same cul-de-sac in a single week. We plan for that clustered demand and keep high-efficiency inventory ready.
Furnace Tune-Up
A furnace tune-up in Clovis costs $80–$200 and should happen every fall before Tule fog season drives sustained heating demand. Our tune-ups include heat exchanger inspection, ignitor testing, blower amp draw, and condensate line clearing. In Clovis, we also check for agricultural dust buildup on the evaporator coil, since dust infiltration here is worse than flat urban Fresno.
Heat Exchanger Inspection & Replacement
Heat exchanger failure is the most serious furnace issue we address in Clovis. A cracked exchanger can leak carbon monoxide into your home. We inspect with cameras and combustion analyzers. Replacement costs vary with furnace age and accessibility, but we give upfront pricing before any work starts. In Harlan Ranch off Deauville Avenue, we swapped a 2006-era Carrier heat exchanger on a tight townhome with alley-load access. The original ignitor had cracked from thermal cycling in the 150°F attic; we replaced it with a durable silicon-nitride ignitor and upgraded the filtration to MERV 13 to handle the agricultural dust infiltration that clogs coils here.
Ignitor Replacement
Silicon-carbide ignitors in 1990s–2000s furnaces fail predictably after 3–5 years of thermal cycling. Clovis’s extreme attic heat shortens that lifespan. We upgrade to silicon-nitride ignitors where possible for longer service life. Most ignitor replacements in Clovis take under an hour.
Gas Valve Repair
Gas valve failures in Clovis often trace to dust contamination or diaphragm hardening from temperature swings. We test manifold pressure, check for proper shutoff, and replace only when repair isn’t safe. Gas work requires a state-licensed technician; Jason Trent oversees every gas valve job personally.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Clovis
We’re certified and experienced on nine leading HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Clovis customers, that means no dead ends. We stock common parts for Carrier, Bryant, and American Standard systems locally, which matters when a January cold snap hits and you need same-day heat. From a single-room mini split to a full commercial system, one team handles it.
Common Heating & Furnace Problems We See in Clovis Homes
- Condensate drain blockages from agricultural dust. In tight alley-load townhomes, condensate drain lines often get blocked by dust from agricultural winds, causing water damage and furnace shutoff. We clear lines and install trap primers where needed.
- Blower motor failure from extreme attic heat. The 140–155°F attics in Clovis tract homes accelerate blower motor failures, especially in the dense 93611 subdivisions where clearances are minimal. We measure amp draw and bearing wear during every tune-up.
- Heat exchanger cracks in 2004–2009 vintage systems. Harlan Ranch and similar 93619 communities face clustered failures as original equipment ages out. We inspect with combustion analyzers and won’t patch what needs replacement.
- Ignitor failure from thermal cycling. Silicon-carbide ignitors in original builder-grade furnaces crack after repeated heating and cooling in superheated attics. We upgrade to silicon-nitride where compatible.
Pricing for Heating & Furnace in Clovis, CA
| Service | Typical Range in Clovis |
|---|---|
| Furnace Repair | $150–$700 |
| Furnace Replacement | $3,500–$7,500 |
| Furnace Tune-Up | $80–$200 |
What moves your job within these ranges? System size, attic accessibility, and whether ductwork modifications are needed. A straightforward ignitor swap in an open garage runs toward the low end. A full replacement in a tight 93611 attic with degraded flex duct hits higher. We inspect first, quote upfront, and don’t start work until you approve the price. Estimates are free. Call (855) 467-1888 to schedule.
We Also Serve Cities Near Clovis
Our service radius covers Fresno, Old Fig Garden, Sanger, and Fowler. If you’re in these communities and need heating or furnace work, the same owner-supervised team that serves Clovis will handle your job. We understand the San Joaquin Valley’s climate demands across all these markets.
Serving Clovis, CA — Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Heating & Furnace in Clovis
Harlan Ranch was built almost entirely between 2004 and 2009, meaning most original furnaces were installed within an 18-month window and are now hitting the 15–20 year failure zone simultaneously. We keep extra inventory ready for this predictable demand wave. If your Harlan Ranch neighbors are replacing systems, schedule an inspection before yours fails mid-winter. Call (855) 467-1888 for a free estimate.
Give us the access details when you call, including gate codes, alley width, and whether the unit is in a closet or open bay. We bring compact equipment for tight clearances and coordinate entry to avoid security conflicts. Jason Trent personally reviews access notes before we dispatch. Call (855) 467-1888 and we’ll plan the logistics.
The San Joaquin Valley’s chronically poor air quality, among the worst PM2.5 and ozone levels in the nation, means Clovis furnaces ingest more particulate than systems in cleaner climates. That dust coats blower wheels, clogs filters, and can infiltrate electronic controls. We recommend MERV 13 or media filtration upgrades during any replacement, and more frequent filter changes than manufacturer minimums. Call (855) 467-1888 to discuss filtration options.
Attic-mounted furnaces aren’t inherently dangerous, but the 140–155°F peak temperatures in Clovis attics accelerate component degradation and can create unsafe conditions if maintenance is neglected. Cracked heat exchangers, loose electrical connections, and gas valve wear all progress faster in thermal stress. We inspect attic systems with extra attention to these failure modes. Don’t skip annual tune-ups. Call (855) 467-1888 to schedule.
Yes. We coordinate with HOA offices, property managers, and homeowners for smooth entry to gated Clovis neighborhoods like Harlan Ranch. Rolling-code remotes and security-focused access systems don’t slow us down if we have clear instructions in advance. Jason Trent reviews every gated-community dispatch personally. Call (855) 467-1888 and mention your community’s entry requirements.
Ready for heating service in Clovis? Call Stonegate Heating & Air California at (855) 467-1888 for a free estimate. Owner Jason Trent supervises every project, and we’ve got 16 years and nearly 500 reviews backing the work.
Written by Jason Trent, Owner at Stonegate Heating & Air California, serving Clovis and the San Joaquin Valley since 2008.