Fast, Reliable Heating & Furnace Across Pomona
Heating & Furnace repair and replacement in Pomona typically runs $150–$700 for repairs and $3,500–$7,500 for full replacement, with most service calls completed same-day. Our Heating & Furnace team knows Pomona’s specific challenges: the oversized ductwork left behind from evaporative cooler conversions, the uninsulated attics of 1950s ranch homes, and the long gas line runs to detached workshops on acreage properties near the San Antonio Wash. We’ve been handling these exact conditions for 16 years. Call (855) 467-1888 for a free estimate.
Pomona sits in a tough inland valley, pinched between the San Gabriel Mountains and the Puente Hills. Summer heat breaks 105°F regularly. Winter nights drop into the 30s. That temperature swing is hard on furnaces, especially when they’re connected to duct systems never designed for forced-air gas heat. We’ve replaced furnaces on Holt Avenue bungalows, tuned up systems in the Lincoln Park neighborhood, and run gas lines to workshops off Phillips Ranch Road. Jason Trent supervises every job personally.
Why Stonegate Heating & Air California Is Pomona’s Preferred Heating & Furnace Company
Our reputation in Pomona is built on solving problems other contractors miss. The 91766 and 91767 ZIP codes are full of homes where a standard furnace swap turns into a callback nightmare because nobody checked whether the existing ductwork could handle the new unit’s static pressure. We’ve seen it. We plan for it.
Sixteen years in business, nearly 500 verified reviews at a 4.7-star average. That volume matters. It means we’ve handled enough Pomona jobs to recognize the patterns: which neighborhoods have asbestos-wrapped ducts, where the old gravity furnaces hide, how the North American Monsoon humidity affects combustion air in enclosed utility closets.
Jason Trent isn’t an owner who signs checks from an office. He’s Field Supervisor on active jobs. When you call Stonegate, you’re getting leadership that inspects the work, not a dispatch board sending whichever tech is available.
We carry parts and factory training for Carrier, Bryant, and American Standard systems, plus six other major brands. No “we don’t service that” dead ends. For Pomona homeowners, that means faster repairs and fewer return trips.
Our Heating & Furnace Services in Pomona
Furnace Repair
Pomona’s furnaces fail in predictable ways once you know the local housing stock. We see cracked heat exchangers from years of overwork, failed ignitors in 15-year-old units, and gas valves sticking after monsoon humidity corrodes the terminals. A typical furnace repair in Pomona runs $150–$700 depending on parts and accessibility. We stock common ignitors, flame sensors, and control boards for Carrier and Bryant systems, so most 91767 and 91768 repairs finish in one visit.
Furnace Replacement
This is where Pomona’s evaporative-cooler legacy hits hardest. The ductwork in central Pomona bungalows was sized for high-CFM swamp coolers, not modern gas furnaces. Install a new 80,000 BTU unit without resizing, and it’ll short-cycle, overheat, and die in five years instead of fifteen. We replaced a failing furnace on a rural Pomona acreage property near the San Antonio Wash, where the homeowner’s detached workshop had its own fuel line and a 30-year-old gravity furnace. Our team installed a new 96% AFUE Carrier gas furnace with a variable-speed blower, resizing the supply plenum to match the existing oversized ductwork from the original evaporative system—ensuring even heat across the main house and the shop in a single trip. Full replacement in Pomona: $3,500–$7,500.
Furnace Tune-Up
A proper tune-up in Pomona checks what other cities ignore. We test combustion air supply in utility closets that were originally unconditioned porch space. We inspect heat exchangers for cracks caused by years of cycling against uninsulated attic ducts. We verify gas pressure at the manifold, critical in 91769 hillside homes where long supply runs drop pressure during cold snaps. Tune-ups run $80–$200. Schedule before December demand hits.
Heat Exchanger Inspection & Replacement
Cracked heat exchangers are a safety issue we don’t soft-pedal. In Pomona’s 1950s ranch homes with uninsulated attic ducts, furnaces run longer to compensate for heat loss. That extra runtime accelerates metal fatigue. We use visual inspection, combustion analysis, and borescope cameras where access is tight. If replacement is necessary, we factor in your duct system’s capacity—a cracked exchanger often signals an underlying airflow problem that killed it. Replacement heat exchangers are brand-specific; our nine-brand fluency means we source correctly without guesswork.
Gas Valve Repair
Flame instability on rural Pomona properties often traces to undersized gas lines running to detached structures. The valve itself may test fine at the manifold but receive insufficient pressure during peak demand. We check line sizing, regulator output, and valve coil resistance. In some 91797 acreage homes, upgrading the gas line is the only permanent fix. We tell you straight if that’s the case.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pomona
We maintain active technical familiarity with nine HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Pomona customers, that means we don’t order parts blindly or guess at wiring diagrams. We stock common Bryant and American Standard ignition components locally, and our Carrier factory training covers the variable-speed furnaces we recommend for Pomona’s duct-challenged homes. Whether your system is five years old or original to a 1970s ranch, we’ve worked on it before.
Common Heating & Furnace Problems We See in Pomona Homes
- Oversized ductwork short-cycling. The evaporative-cooler ducts in central Pomona bungalows move too much air too easily for modern gas furnaces. The furnace heats the house quickly, shuts off, restarts ten minutes later. That cycling kills heat exchangers and wastes gas. We resize or add zoning to fix it permanently.
- Uninsulated attic ducts bleeding heat. 1950s ranch homes near Ganesha Park and Lincoln Park often have sheet-metal ducts running through ventilated attics. By the time warm air reaches the bedroom, it’s lost 15–20 degrees. The furnace runs forever. The gas bill spikes. We insulate, seal, or reroute.
- Long gas line runs to detached workshops. Properties near the San Antonio Wash or north of Mission Boulevard frequently have 100+ foot gas lines to outbuildings. Undersized pipe drops pressure during cold snaps, causing weak flames, sooting, and carbon monoxide risk. We calculate line sizing from the meter and upgrade where needed.
- Humidity corrosion in control boards. July through September, monsoon moisture pushes Pomona dew points past 60°F. Furnaces in enclosed closets or crawl spaces see board failures from condensation. We relocate controls or improve ventilation where possible.
Pricing for Heating & Furnace in Pomona, CA
Here’s what heating & furnace work costs in Pomona’s market. These ranges reflect real jobs we’ve completed across the 91767, 91768, 91769, and 91797 ZIP codes.
| Service | Price Range |
|---|---|
| Furnace Repair | $150–$700 |
| Furnace Replacement | $3,500–$7,500 |
| Furnace Tune-Up | $80–$200 |
What moves the needle on replacement cost: ductwork modifications (common in Pomona), gas line upgrades for rural properties, and permit fees. We itemize everything before work starts. No “we’ll see” pricing. Call (855) 467-1888 for a free estimate at your Pomona home.
We Also Serve Cities Near Pomona
Our service radius covers San Dimas, La Verne, Charter Oak, and Diamond Bar from our Sacramento-based operations. If you’re in these communities and facing the same inland-valley heating challenges, our Heating & Furnace team handles those jobs with the same owner-supervised approach. Distance from the coast means similar equipment stress, similar ductwork legacy issues, and the same need for techs who won’t treat your home like a training exercise.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Heating & Furnace in Pomona
Short-cycling after a tune-up almost always means the ductwork is oversized for the furnace. The 91766 area has many 1940s–1960s homes originally built with evaporative coolers, and their high-CFM ductwork lets heated air escape too fast. The thermostat satisfies quickly, but the furnace never runs long enough to reach steady-state efficiency. We measure static pressure and often need to resize the supply plenum or add a bypass damper. Call (855) 467-1888 and we’ll diagnose it properly.
A new furnace will run more efficiently, but uninsulated ducts in a ventilated Pomona attic waste 20–30% of that heat before it reaches your rooms. We typically recommend duct insulation or rerouting as part of any replacement in these homes. Otherwise you’re buying a 96% AFUE unit and getting 70% delivered efficiency. We include duct assessment in every Pomona replacement quote.
Yes, but we check gas line sizing first. Rural Pomona properties often have long runs from the meter that drop pressure during cold weather. We calculate BTU load, line length, and pipe diameter against code tables. If the line’s undersized, we upgrade it or specify a lower-BTU unit. We’ve done this exact job near the San Antonio Wash with a 96% AFUE Carrier and proper plenum resizing.
Yes. A cracked heat exchanger can leak carbon monoxide into your living space. No reputable technician will patch or ignore it. We verify cracks with visual inspection and combustion analysis, then replace the exchanger or the entire furnace depending on age and parts availability. In Pomona’s climate, we also investigate what caused the crack—often short-cycling or poor airflow from that oversized ductwork.
Yes. The City of Pomona requires permits for furnace replacement, and the work must pass inspection. We pull permits on every job and coordinate inspections. For homes with asbestos-wrapped ducts or unpermitted prior work, we flag those issues upfront so there are no surprises at inspection. Call (855) 467-1888 and we’ll walk you through the process.
Written by Jason Trent, Owner and Field Supervisor at Stonegate Heating & Air California, serving Pomona and the inland valley since 2009.